What Is DMS in Beer And Why You Should Care

When you’re brewing beer, a clean and tasty flavor is key. But sometimes, unexpected things sneak in and DMS (Dimethyl Sulfide) is one of those troublemakers. It’s a sulfur-based compound that can make your beer taste like cooked corn, boiled vegetables, tomato soup, or even canned cabbage. Not exactly the vibe you’re going for in a crisp lager or smooth ale, right?

Let’s break it down.

What Is DMS, Really?

DMS forms during the brewing process, especially during malting and wort boiling. It’s mostly created from a substance in malt called SMM (S-methylmethionine). When malt is heated or wort is boiled, SMM breaks down and releases DMS. If it’s not boiled off or handled correctly, it can stay in your beer.

You won’t always smell or taste it right away – DMS has different flavor thresholds depending on the type of beer and how strong the other flavors are.

How Much DMS Is Too Much?

Here’s a quick guide to how sensitive people are to DMS in different beer settings:

Beer/Matrix	DMS Threshold (µg/L)	What It Means
Water	~10 µg/L	Very easy to smell or taste.
Wort	~50 µg/L	Can be hidden by sweetness.
Lager Beer	~30 µg/L	DMS is more noticeable in clean lagers.
Ale Beer	50–100 µg/L	More flavors to mask DMS – harder to detect.

Key takeaway: DMS is much more obvious in a light, clean beer (like a lager or kölsch) than in a hoppy or fruity beer (like a NEIPA).

DMS in Different Beer Styles

Not all beer styles treat DMS the same. In some, a tiny bit might be okay. In others, even a small amount can ruin the experience.

Beer Style	What’s Acceptable
Pilsner / Lager	Less than 30 µg/L – any DMS may be a fault.
Cream Ale	Up to 100 µg/L can still be okay.
British Ales	Often masked by malts and esters – not critical unless very strong.
Hazy IPAs	Usually hidden by hops and haze.

How to Prevent DMS in Your Beer

The good news? You can reduce or avoid DMS with good brewing practices. Here’s how:

Boil your wort vigorously, DMS evaporates during a strong boil. A weak boil traps it.
Don’t cover your kettle. You want the steam (and DMS) to escape.
Cool your wort quickly. If it stays hot too long, more DMS can form.
Use proper fermentation. A healthy, complete fermentation helps remove small off-flavors.
Choose your malt wisely. Lightly kilned pilsner malts create more SMM, so handle them carefully.

Why You Should Lab-Test DMS (Not Just Smell It)

It’s tempting to rely on your nose or a tasting panel to catch DMS but that doesn’t always work. Here’s why:

DMS can be masked by hops, esters, sweetness, or other aromas.
Some people are very sensitive to DMS, while others can barely detect it.
Low levels may be fine in some beers but are a clear flaw in others, knowing the number matters.
If your beer is being judged, sold, or exported, you need proof, not just a hunch.

At testmybeer.com, we use accurate lab methods (based on EBC guidelines) to quantify DMS in micrograms per liter (µg/L). That means no guesswork, just real data to help you improve your beer.

How to Understand Your DMS Test Results

At testmybeer.com, we measure DMS in micrograms per liter (µg/L). Here’s how to interpret your results:

< 30 µg/L: Great for lagers and light beers, you’re in the clear.
30–50 µg/L: Watch out in lagers or kölsch, could be borderline.
50–100 µg/L: May be acceptable in hoppy ales or cream ales but clean styles will suffer.
>100 µg/L: Likely to be noticeable in most beers, time to review your process.

Final Thoughts

DMS doesn’t always shout, sometimes it whispers. But if your beer tastes like boiled veggies or canned corn, it’s worth checking. With a bit of attention to boiling and cooling, you can keep your beer clean, fresh, and full of the flavors you intended.

Want to know where you stand?
Send us your sample and test your beer with us.
We’ll help you catch DMS, and a lot more, before it reaches your glass.